Command-Line Interface (CLI)

Pinot provides a rich CLI to perform almost every operation on the cluster. You can execute all the commands using the pinot-admin.sh . The script is located in the bin/ directory of the Pinot binary distribution or /opt/pinot/bin in docker container.

The following commands are supported by the admin script.

Add Schema

Upload the schema configuration to controller. If their is already a schema with same name, it will be updated.

pinot-admin.sh AddSchema -schemaFile /path/to/schema.json -controllerHost localhost -controllerPort 9000 -exec

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

schemaFile

path to schema JSON file mentioned in table configuration.

controllerHost

controllerHost on which to send the upload requests

controllerPort

controllerPort on which to send the upload requests

exec

If not specified, a dry run will be done but configs won't actually be uploaded.

Add Table

Upload the table configuration to controller.

pinot-admin.sh AddTable -tableConfigFile /path/to/table.json -schemaFile /path/to/schema.json -controllerHost localhost -controllerPort 9000 -exec

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

tableConfigFile

path to JSON file containing Table configuration.

schemaFile

path to schema JSON file mentioned in table configuration.

controllerHost

controllerHost on which to send the upload requests

controllerPort

controllerPort on which to send the upload requests

exec

If not specified, a dry run will be done but configs won't actually be uploaded.

Add Tenant

Add a new tenant to the server

pinot-admin.sh AddTenant -name myTenant -role SERVER -instanceCount 10 -controllerHost localhost -controllerPort 9000 -exec

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

controllerHost

controllerHost on which to send the upload requests

controllerPort

controllerPort on which to send the upload requests

name

name of the tenant

role

where the tenant should reside. can be BROKER or SERVER

instanceCount

total number of instances to assign to this tenant

offlineInstanceCount

(only applicable for SERVER) total number of instances which can host offline tables belonging to this tenant

realTimeInstanceCount

(only applicable for SERVER)total number of instances which can host realtime tables belonging to this tenant

exec

If not specified, a dry run will be done but configs won't actually be uploaded.

Check Offline Segment Intervals

Lists all the segments which have invalid time interval. Only OFFLINE segments are supported.

pinot-admin.sh CheckOfflineSegmentIntervals -zkAddress localhost:2181 -clusterName PinotCluster -tableName myTable

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

tableName

Comma separated list of tables to check for invalid segment intervals. By default all tables are checked.

Change Num Replicas

This command changes the replicas of the table. The number of replicas are set from the latest available table config.

pinot-admin.sh ChangeNumReplicas -tableName myTable -clusterName PinotCluster -zkAddress localhost:2181 -exec

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

tableName

name of the table on which to perform operation

exec

If not specified, a dry run will be done but configs won't actually be uploaded.

Change Table State

Enable, Disable or Drop the table available in database.

pinot-admin.sh ChangeTableState -tableName myTable -state disable -controllerHost localhost -controllerPort 9000 -exec

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

controllerHost

controllerHost on which to send the upload requests

controllerPort

controllerPort on which to send the upload requests

tableName

name of the table to modify

state

can be one of enable , disable or drop

Create Segment

Create segment files from the input file in local filesystem.

pinot-admin.sh CreateSegment -dataDir /path/to/data/dir -format CSV -outDir /path/to/output/dir -overwrite -tableConfigFile /path/to/table.json -schemaConfigFile /path/to/schema.json

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

dataDir

Directory containing input files

format

Input data formats. See Input formats for all the supported formats

outDir

Local output directory to publish the segments

overwrite

Set to true to overwrite segments of already present in the directory

tableConfigFile

Path to Table Config

schemaFile

readerConfigFile

properties file containing the config related to the reader. See Input formats

retry

Number of retry attempts in case of failure

postCreationVerification

Set true to verify the segment files post creation.

numThreads

Number of threads to use to execute the segment creation job

Convert Pinot Segment

Convert the segment file from Pinot specific format to other data formats. Currently only CSV, AVRO and JSON are supported.

pinot-admin.sh ConvertPinotSegment -dataDir /path/to/data/dir -outputDir /path/to/output/dir -outputFormat CSV -overwrite -csvDelimiter , 

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

dataDir

directory containing the segment files. Only local filePaths are supported

outputDir

directory to put the converted segment files in.

outputFormat

format to output the files in. Can be one of CSV, AVRO or JSON

overwrite

set it to overwrite the files if already present in output directory

csvDelimiter

delimiter to use for CSV files. only applicable to CSV

csvListDelimiter

delimiter to use for list/array in CSV files. only applicable to CSV

csvWithHeader

set to print CSV header in output file. Default is false.

Delete Cluster

Delete the cluster namespace from zookeeper.

pinot-admin.sh DeleteCluster -clusterName PinotCluster -zkAddress localhost:2181

All the options should be prefixed with - (hyphen)

Option

Description

clusterName

name of the cluster to delete

zkAddress

Comma seperated host:port list of zookeeper from which to delete the cluster namespace

Launch Data Ingestion Job

Run job to consume batch or streaming data and push it to Pinot.

pinot-admin.sh LaunchDataIngestionJob -jobSpecFile /path/to/job_spec.json -propertyFile /path/to/job.properties -values dt=2020-08-10 hour=15

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

jobSpecFile

Path to job spec file. Only local file paths are supported

propertyFile

Path to properties file. This file can contain properties related to ingestion job or template paramaters

values

list of string containing the values to replace template parameters with

Merge/Rollup Segments

Perform operations similar to the Minion Merge Rollup Task, where multiple segments can be merged based on the provided spec.

This command is mostly for debugging purpose. Use Minion Merge Rollup Task for production.

pinot-admin.sh SegmentProcessorFramework -segmentProcessorFrameworkSpec /path/to/framework_spec.json

Fields within the spec file

Field

Description

inputSegmentsDir

directory that contains all the input segment files or directories to be merged

outputSegmentsDir

directory in which merged segment file should be put

tableConfigFile

path to table config for which segments are to be merged

schemaFile

path to schema of the table for which segment should be merged

timeHandlerConfig

configs related to time handling, including type, startTimeMs, endTimeMs, roundBucketMs, partitionBucketMs

partitionerConfigs

list of partition related configs, including partitionerType, numPartitions, columnName, transformFunction, columnPartitionConfig

mergeType

CONCAT, ROLLUP, DEDUP

aggregationTypes

map from metric column to aggregation function type for the ROLLUP merge type

segmentConfig

configs related to the generated segments, including maxNumRecordsPerSegment, segmentNamePrefix

Move Replica Group

Command to migrate a subset of replica group from current servers to the provided destination servers. This command is intended to be run multiple times to migrate all the replicas of a table to the destination servers (if intended).

pinot-admin.sh MoveReplicaGroup -zkHost localhost:2181 -cluster PinotCluster -srcHosts host1,host2 -destHostsFile /path/to/destination/file -tableName myTable -exec

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

srcHosts

path of the file with all the source hosts or comma seperated list of hostnames

destHostsFile

path of the file with all the destination hosts

tableName

name of the table for which replica group is to be moved. Supports only OFFLINE tables currently

maxSegmentsToMove

maximum number of segments to move. default is Integer.MAX_VALUE

zkHost

zookeeper host:port string

cluster

name of the cluster inside zookeeper .

exec

set to execute the command. If unset, only a dry run will be done

Operate Cluster Config

Modify cluster level configs for pinot. These are the configs which are applicable to all nodes in the cluster.

pinot-admin.sh OperateClusterConfig -controllerHost localhost -controllerPort 9000 -operation ADD -config pinot.broker.enable.query.limit.override=1

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

operation

Type of operation to perform. Can be one of GET, ADD, UPDATE or DELETE

config

The config on which operation should be performed. In case of ADD or UPDATE, the config value is provided after =

controllerHost

The host on which to send the request

controllerPort

The port on which to send the requests

Post Query

Execute a SQL query on the cluster.

pinot-admin.sh PostQuery -brokerHost localhost -brokerPort 8000 -queryType sql -query "SELECT * FROM myTable"

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

brokerHost

broker host to execute the query on

brokerPort

broker port to execute the query on

queryType

can be one of sql or pql(deprecated).

query

SQL query to execute

Rebalance Table

Rebalance a table i.e. reassign instances and segments for a table in the cluster.

For segment reassignment, the following modes are offered:

  • With-downtime rebalance: the IdealState is replaced with the target segment assignment in one go and there are no guarantees around replica availability. This mode returns immediately without waiting for ExternalView to reach the target segment assignment. Disabled tables will always be rebalanced with downtime.

  • No-downtime rebalance: care is taken to ensure that the configured number of replicas of any segment are available (ONLINE or CONSUMING) at all times. This mode returns after ExternalView reaching the target segment assignment. In the edge case scenarios mentioned later, if best-efforts is disabled, rebalancer will fail the rebalance because the no-downtime contract cannot be achieved, and table might end up in a middle stage. User needs to check the rebalance result, solve the issue, and run the rebalance again if necessary. If best-efforts is enabled, rebalancer will log a warning and continue the rebalance, but the no-downtime contract will not be guaranteed. Downtime can occur in the following edge case scenarios -

    • Segment falls into ERROR state in ExternalView -> with best-efforts, count ERROR state as good state.

    • ExternalView has not converged within the maximum wait time -> with best-efforts, continue to the next stage

If the controller that handles the rebalance goes down/restarted, the rebalance isn't automatically resumed by other controllers

pinot-admin.sh RebalanceTable -zkAddress localhost:2181 -clusterName PinotCluster -tableName myTable -reassignInstances -includeConsuming -downtime  

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

tableName

name of the table on which to perform operation

reassignInstances

set to reassign instances before reassigning segments (false by default)

includeConsuming

set to reassign CONSUMING segments for real-time table (false by default)

bootstrap

set to rebalance table in bootstrap mode (regardless of minimum segment movement, reassign all segments in a round-robin fashion as if adding new segments to an empty table, false by default)

downtime

Set to allow downtime for the rebalance (false by default)

minAvailableReplicas

minimum number of replicas to keep alive during rebalance, or maximum number of replicas allowed to be unavailable if value is negative (default is 1), Only applicable if downtime is set to false

bestEfforts

set to use best-efforts to rebalance i.e. not fail the rebalance when the no-downtime contract cannot be achieved, false by default

Start Broker

Start a broker instance on host

pinot-admin.sh StartBroker -zkAddress localhost:2181 -clusterName PinotCluster -configFileName /path/to/broker.conf

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

brokerHost

hostname of the instance on which to run the broker

brokerPort

port on which the broker should listen. Default 8099.

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

configFileName

path to properties file containing controller configs. See Broker for complete configuration

Start Controller

Start a controller instance on host

pinot-admin.sh StartController -controllerMode helix_only -dataDir /path/to/data/dir -zkAddress localhost:2181 -clusterName PinotCluster -configFileName /path/to/controller.conf

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

controllerMode

Should be one of dual, pinot_only or helix_only. Default is dual

controllerHost

hostname of the instance on which to run the controller

controllerPort

port on which the controller should listen. Default 9000.

dataDir

path to directory to store data. Default is java.io.tmpDir + PinotController

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

configFileName

path to properties file containing controller configs. See Controller for complete configuration

Start Server

Start a server instance on host

pinot-admin.sh StartServer -dataDir /path/to/data/dir -zkAddress localhost:2181 -clusterName PinotCluster -configFileName /path/to/server.conf

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

serverHost

hostname of the instance on which to run the broker

serverPort

port on which the broker should listen. Default 8099.

serverAdminPort

port on which admin API should be available. Default it 8097

dataDir

directory in which to store the data

segmentDir

directory in which to download the .tar segment files temporarily

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

configFileName

path to properties file containing controller configs. See Server for complete configuration

Start Service Manager

Start multiple Pinot processes with all the default configurations using a single command.

pinot-admin.sh StartServiceManager -zkAddress localhost:2181 -clusterName PinotCluster -bootstrapServices CONTROLLER BROKER -bootstrapConfigPaths /path/to/controller.conf /path/to/broker.conf 

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

port

set to -1 to disable, 0 to run service manager on any available port

bootstrapConfigPaths

list of Pinot config file paths. Each config file requires an extra config: pinot.service.role to indicate which service to start. The service role can be one of CONTROLLER, BROKER or SERVER

bootstrapServices

list of service roles to start with default configurations. For these roles, the default configuration will be taken even if bootstrapConfig is provided.

Show Cluster Info

Show all the available clusters namespaces along with metadata

pinot-admin.sh ShowClusterInfo -clusterName PinotCluster -zkAddress localhost:2181

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

tables

tags

Stop Process

Stop all the processes of the specified types running on the host.

pinot-admin.sh StopProcess -controller -broker -server

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

controller

Stop all the controller processes

broker

Stop all the broker processes

server

Stop all the server processes

zookeeper

Stop all the zookeeper process. The process should have been started by pinot admin script otherwise it won't be killed.

kafka

Stop all the kafka process. The process should have been started by pinot admin script otherwise it won't be killed.

Upload Segments

Compress and upload segment files to server.

pinot-admin.sh UploadSegment -controllerHost localhost -controllerPort 9000 -segmentDir /path/to/local/dir -tableName myTable

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

controllerHost

hostname or ip of the controller

controllerPort

port of the controller

segmentDir

local directory containing segment files

tableName

name of the table to push the segments in

Validate Config

Validate the table configs and schema present in Zookeeper.

pinot-admin.sh ValidateConfig -clusterName PinotCluster -zkAddress localhost:2181 -tableConfig -tableName mytable myTable2 -schema -schemaNames myschema myschema2

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

tableConfig

if set, table configs are validated

tableNames

space seperated list of table names. By default, all tables are validated

schema

if set, schemas are validated

schemaNames

space seperated list of schema names. By default, all schemas are validated

Validate Segment

Compares Helix Ideal state and External view for specified table prefixes.

pinot-admin.sh ValidateSegment -tablePrefix myTable -clusterName PinotCluster -zkAddress localhost:2181

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

tablePrefix

prefix of the table names for which the validation should be done

Verify Cluster State

Verify if all the tables in the cluster have same Ideal State and External View.

pinot-admin.sh VerifyClusterState -zkAddress localhost:2181 -clusterName PinotCluster -tableName myTable -timeoutSec 10

Supported Options

All the options should be prefixed with - (hyphen)

Option

Description

zkAddress

comma seperated host:port string of zookeeper to connect

clusterName

name of the cluster to connect to. It can be thought of as a namespace inside zookeeper.

tableName

name of the table for which the validation should be done. By default, all tables are verified.

timeoutSec

timeout in seconds for the request to check the cluster state.

Last updated